Slim storage cabinet can be an excellent storage device, but when the content cannot be easily seen completely. It can easily become a tailor made storage stack. Then, assemble the small cabinets that are generated on the wall at eye level. To create incentives for clean storage. These cabinets can be built to any dimension and installed on any wall with nails or masonry composition.
Deploy two 1/2 by 6 inches by 24 boards on their long and thin sides. Position the boards, which will be the side panels of the small cabinet. Then, parallel to each other about a foot away. Slide one 1/2 by 6 inches through joint 12 to the other two, perpendicular to them and pressing one against the set of the ends of the side boards.
Make two holes through this forum, which will be the upper board of the booth, and on each side plate. Then, put the 2-inch wood screws in each of the drilled holes and fasten them with a drill. Repeat this procedure for the opposite side, using another means in a 6 by 12 inch board as the bottom board. Set a table 1/2 by 12 by 25 inches on the top of the rectangular frame composed of the side boards, top board and bottom board. Arrange this new plate, which is the back plate of the wall cabinet. So that all the edges are aligned with the edges of the frame.